Everything Natural Pools
  • Home
  • Shop By
    • Product Category >
      • Pumps
      • Plumbing Supplies
      • Skimmer
      • UV Sterilizers/Clarifiers
      • Waterfalls and Fountains
      • Watertight Liners
      • Care and Maintenance
      • DIY Plans and Kits
      • Plant Supplies
  • About Natural Pools
  • Shipping and Returns
  • Gift Cards
  • Guides
  • Contact

UV Sterilizers

Picture
Planktonic algae and other unwanted micro-organisms can be prevented, reduced or even eliminated by adding a UV unit to your plumbing system. Water flows through the UV Sterilizer chamber where it (and any micro-organisms floating in it) are exposed to a super bright UV light. This UV light kills the organisms or inhibits their ability to reproduce.
.Be sure to plumb your in-line UV Sterilizer after your pump (on the discharge side), preferably after a mechanical filter like a fluid bead filter or cartridge filter if you have one. Not everyone needs an additional mechanical filter, but we recommend it if you will be using a heater.
Picture
Picture


Typically, you will need to turn over the entire pond volume at least 4-6 times per day through the UV unit at the required flow rate (faster than recommended flow will result in less than necessary exposure time). 


Still have questions?
Consider purchasing our Guide Book!

Support

Phone: (785) 856-5546 Ext. 6
Email: contact@everythingnaturalpools.com
Address: 11621 Kaw Dr., Kansas City, Kansas 66111
Shipping & Returns
Gift Cards
​
Everything Natural Pools is powered by Total Habitat LLC
Copyright © 2019
  • Home
  • Shop By
    • Product Category >
      • Pumps
      • Plumbing Supplies
      • Skimmer
      • UV Sterilizers/Clarifiers
      • Waterfalls and Fountains
      • Watertight Liners
      • Care and Maintenance
      • DIY Plans and Kits
      • Plant Supplies
  • About Natural Pools
  • Shipping and Returns
  • Gift Cards
  • Guides
  • Contact